Services for working machine «CATERPILLAR RM-500″

  • -

Services for working machine «CATERPILLAR RM-500″

Category : News

CUE “Brestobldorstroy” offers its services for working machine «CATERPILLAR RM-500″ for the stabilization and recovery of the roadway.

The machine opens, the old asphalt surface grinds and mixes it with the existing base, providing an optimal particle size distribution at the outlet. With further compaction of the resulting material formed the new reinforced base, which later serves as a basis for laying hot asphalt-concrete mix. When adding bitumen emulsion resulting material can serve as a ready option for coverage of minor rural roads. Accordingly, Cat RM500 can be used in two ways: for the regeneration of the old coating in the repair and reconstruction of roads and for soil stabilization in the regeneration of minor rural roads, access roads in the regeneration of the oil fields, enhance the bearing capacity of roads vgornyh careers.

The process of soil stabilization in the construction of new roads would greatly reduce the cost of road construction materials:

reduce costs by 50% through the use of road-building materials available on the site;
4 times embroider the range of possible use of materials suitable for road construction;
increase the strength of the soil to 150-525%;
extend the life of the road to 50-300%;
reduce costs by 70% by installing a hot asphalt mix;
reduce dust formation and permeability of 50-70% and gryazeobrazovanie – 80%.

CUE “Brestobldorstroy” leases

car road marking “relief” for applying horizontal structural lines marking governing road traffic, cold plastic on a clean and dry cement concrete and asphalt concrete pavement at an ambient temperature from + 5 ° C to + 30 ° C and a relative humidity 85%. The machine performs a road marking plastic prepared based liquid resins which do not contain organic solvents.
Attendants 2 people
The width of the deposition lines 100, 200, 400 mm
Adjustable width sprinkling glass beads 100, 200, 400 mm
Working speed road marking 0.3 – 3 km / h
Work road gradient of 10%
The amount applied of 2.5 – 3.5 kg / m
installation “Fox” for automatic re-striping. The unit provides a repetition of axial and edge lines road markings (1.1 pp according to 1.2.1, 1.2.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 1.9 in 1131 and STB GOST R 51256) in a continuous mode at any movement said sequence of lines.
Installation is mounted on a flatbed trailer and works in conjunction with a road marking machine type “Bumblebee-11A” or other similar machine. Installation is carried out road marking Paints for road marking, having a density of 1.4 – 1.7 g / cc and a viscosity of 90 – 120 seconds. at ambient temperature from + 5 ° C to + 35 ° C and a relative humidity of 85%. Working speed road marking 3 – 12 km / h. Steadily working day and night.

We carry out road works using modern high technology:

surface treatment pavements settings “Chipsiller-41” and “Ursus 3000”;
arrangement of roadside installations “Delta-3F”;
patching of pavement installations “Madpatcher-MP-4.5”, “Typhoon”, “Turbodzhet T-250”;
applying horizontal markings on the roadway road vehicle “Bee-11A”, equipped with a system of repetition road marking «LIS».
milling asphalt carpets self-propelled cutter SFS-100.